The gentlest media we run. Soda blasting lifts paint, grease, soot, and mold off delicate surfaces without scoring or warping what's underneath.
Soda blasting uses sodium bicarbonate — yes, baking soda — driven by compressed air to strip coatings and contaminants without damaging the surface underneath. It's the softest media we run, which makes it the right call when a tougher abrasive like garnet or crushed glass would do more harm than good. Soda fractures on impact and lifts paint, grease, soot, mold, and old finishes off the substrate, then rinses away clean because it's water-soluble.
We bring soda blasting to you across Southwest Florida — Naples, Marco Island, Bonita Springs, Estero, Fort Myers, and Cape Coral. If you've got a delicate job and you're not sure soda is the answer, call or text us at (239) 227-1768 and we'll tell you straight.
Soda blasting propels sodium bicarbonate particles at a surface under low to moderate air pressure. Unlike harder abrasives, the soda crystals shatter the instant they hit, releasing energy that breaks the bond between a coating and the material below — without cutting into the material itself. That single trait is what separates soda from the rest of our media lineup.
Compare it to sandblasting or garnet blasting: those abrasives etch and profile a surface, which is exactly what you want before a heavy industrial coating, but it's overkill — and potentially destructive — on thin metal, soft wood, or a finish you want to keep. Soda strips the unwanted layer and leaves the good surface intact. It also won't generate the heat that warps sheet metal, so it's a go-to for thin panels and engine parts.
The other big advantage is cleanup. Soda is non-toxic, water-soluble, and food-safe, so it rinses off with water and won't contaminate the area. For an even tidier process on certain jobs, ask us about dustless blasting, where we wet the media to knock down airborne dust entirely.
Soda blasting shines on delicate and mixed-material surfaces where a harder abrasive would cause damage. That includes soft and aged wood, brick, block, and other masonry, aluminum and other thin metals, chrome, glass, plastic, fiberglass, and assembled equipment with gaskets, seals, and bearings you don't want to gouge.
It's a favorite for engine blocks and automotive parts because it cleans grease, carbon, and old paint out of intricate castings without etching the metal or driving abrasive into oil passages. We see the same on residential jobs — soda lifts decades of paint off old wood, brick, and masonry while preserving the texture and detail of the material. For automotive and equipment work specifically, our automotive blasting page covers frames, parts, and full restorations in more depth.
Yes — paint, grease, soot, and mold are exactly what soda blasting does best. The media lifts paint and old coatings cleanly, and because soda is mildly alkaline it cuts grease and oil at the same time, which is why it's so effective on engines and kitchen or shop equipment.
Soda is also the standard answer for fire and smoke restoration. After a fire, soot and char bond to wood framing, masonry, and structural surfaces, and the smell soaks in. Soda blasting strips the soot, neutralizes much of the odor thanks to its deodorizing properties, and leaves the structure sound and ready to rebuild. On mold remediation jobs, soda removes mold from wood and masonry and helps clean the substrate down to bare material. Got a fire, flood, or mold cleanup in Naples or anywhere in SW Florida? Text us a few photos at (239) 227-1768 and we'll scope it.
Soda blasting is food-safe and environmentally friendly, which makes it ideal for kitchens, breweries, food-processing equipment, and any space where contamination is a concern. Sodium bicarbonate is the same compound used in baking and cooking, so it leaves no toxic residue and washes away with water.
That same profile makes it a smart choice near landscaping, pools, and lanais where you don't want harsh abrasive grit left behind. We still mask, tarp, and contain every job to keep your property clean — and on dusty interiors we'll often pair soda with a wet/dustless setup. If you want the lowest-dust version of this process, see our dustless blasting service.
Yes. Soda is the softest media we run. The crystals shatter on impact and release their energy by breaking the bond between a coating and the surface, rather than cutting into the surface itself. That's why it's the right choice for thin aluminum, soft or aged wood, chrome, glass, plastic, fiberglass, and assembled equipment. If a job genuinely needs a more aggressive abrasive to profile the surface, we'll tell you and recommend garnet or crushed glass instead.
No. Soda blasting doesn't generate the friction heat that causes thin sheet metal to warp, and it doesn't etch the base metal. That makes it a popular choice for car body panels, engine parts, and other thin or detailed metalwork where harder media would cause distortion or pitting.
Absolutely — it's one of the best tools for the job. Soda strips soot and char off wood framing and masonry, and because sodium bicarbonate is a natural deodorizer it helps neutralize the smoke smell that soaks into a structure after a fire. The result is a clean, sound substrate ready for rebuilding. We handle fire, flood, and mold cleanups throughout Southwest Florida.
Yes. Soda is mildly alkaline, so it cuts grease and oil while it strips paint and coatings. That's why it works so well on engine blocks, transmissions, machinery, and shop or kitchen equipment that's caked with grime — it cleans and degreases in a single pass without driving abrasive into bearings, seals, or oil passages.
Very. Sodium bicarbonate is non-toxic, food-safe, and water-soluble, so it rinses away with water and leaves no harmful residue. That's a big advantage near pools, lanais, landscaping, and food-prep areas. We also mask and contain every job, and on dusty interior work we can run a wet/dustless setup to keep airborne dust to a minimum.
The simplest way is to call or text us at (239) 227-1768 with a description or a few photos. As a rule of thumb: soda is for delicate surfaces, mixed materials, grease, soot, mold, and finishes you want to preserve, while harder media like crushed glass or garnet is for heavy rust, thick coatings, and surfaces you're about to recoat. We carry multiple media types and pick the right one for your specific surface.
Yes. We're fully mobile and come to you across Naples, Marco Island, Bonita Springs, Estero, Fort Myers, Cape Coral, and Golden Gate. We bring the equipment, media, containment, and power to your home, shop, boatyard, or job site. Reach us Monday through Saturday, 8a to 6p, at (239) 227-1768.
Tell us about your delicate surface and we'll bring the right media to you anywhere in Southwest Florida. Call or text (239) 227-1768.
Tell us a little about the job and we'll get right back to you.
Thanks — we'll be in touch shortly to set up your free estimate.