Strip failed sealer, paint and coatings off your pavers, pool deck and walls — clean mold and algae off travertine, brick and stone, and bring tired wood back to life. Fully mobile to your home across Southwest Florida.
Old paver sealer doesn't last forever in the SW Florida sun. It clouds over, turns white and hazy, peels and traps moisture — and once it fails, you can't just seal over it. We blast the old, failed sealer and coatings completely off your paver driveway, walkway and pool deck, opening the surface back up so a fresh sealer can soak in and bond the way it's supposed to.
The same goes for painted concrete, dried-on thinset, mastic, epoxy and stubborn coatings on patios, garage floors and lanais. Media blasting lifts it cleanly without the gouging and chatter marks a grinder leaves behind. When you're ready to re-seal, see our dedicated paver sealer removal service.
Mold, algae and that black mildew streaking are a fact of life on shaded lanais, north-facing walls and pool decks in our climate. Soda blasting and dustless blasting clean it out of the pores of travertine, brick, natural stone and concrete without the high-pressure water that drives grime deeper and erodes soft stone.
Because we control the media and pressure, we lift the growth and surface staining while protecting the finish underneath — so your travertine pool deck or brick walkway looks restored, not blasted-out. It's a real reset, not the temporary surface clean you get from a pressure washer.
Soda and soft media blasting strip weathered gray, old stain, paint and mildew off wood without tearing up the grain like sanding or aggressive pressure washing does. It's the go-to method for cleaning up decks, fences, pergolas, gates and exposed cypress or pine beams, and it reaches into corners, joints and tight grain a sander simply can't.
You're left with clean, bright wood that's ready to re-stain or seal — and because the process is gentle, soft cypress and cedar come through it intact. Ask us about soda blasting for the most delicate wood and surfaces.
Graffiti, spray paint and tagging come off stucco, block, brick, concrete and painted walls with media blasting — no harsh chemical strippers and no ghosting left behind. We match the media and pressure to the surface so the paint lifts while the substrate stays sound, whether it's a smooth stucco wall, a rough block fence or decorative stone.
For sensitive or painted surfaces you don't want to damage, dustless and soda blasting give us a gentle option that still gets the tag completely off. It's the same approach we use for commercial buildings and HOAs across the region.
A pressure washer only cleans the surface — it can't remove failed sealer, paint or coatings, and cranked up too high it gouges pavers, erodes soft travertine and blows out wood grain. Grinding and sanding are slow, throw clouds of dust, and leave swirl marks and uneven low spots. Media blasting removes the coating or growth completely, reaches into texture, joints and tight contours, and leaves the exact clean, open surface that new sealer, stain or paint is designed to bond to.
The result lasts longer and looks better — and with dustless (wet) blasting, cleanup around your home, pool and landscaping stays low. Call or text (239) 227-1768 and we'll come look at it.
No. We match the media and pressure to your specific surface — and on soft stone like travertine we use gentler methods such as soda or dustless blasting. We always test and dial it in on an inconspicuous spot first so we strip the sealer, paint or growth without harming the surface underneath.
Pressure washing only cleans the top layer — it can't remove failed sealer, paint or coatings, and high pressure can erode soft pavers and stone. Blasting removes the coating and growth completely, gets down into the pores and joints, and leaves the surface ready to re-seal. It's a real reset, not a temporary clean.
Yes. Cloudy, white, peeling sealer has to come off before new sealer will bond. We blast every bit of the old, failed sealer and coating off so a fresh seal soaks in and lasts. See our paver sealer removal page for details.
Yes. Soda and dustless blasting clean mold, mildew and algae out of the pores of travertine, brick, concrete and stone on pool decks, lanais and walls — without driving grime deeper or eroding the surface the way a high-pressure washer can.
Yes. Soda blasting takes the gray weathering, old stain, paint and mildew off decks, fences, pergolas, gates and beams while protecting the grain, leaving clean, bright wood ready to re-stain or seal.
Yes — we're fully mobile across Southwest Florida. We bring the equipment to your driveway, lanai, pool deck or yard from Naples and Marco Island up through Bonita Springs, Estero, Fort Myers and Cape Coral.
Call or text us at (239) 227-1768, or message us on Facebook, and we'll set up a free on-site estimate. Surface type, square footage and how badly the coating has failed all factor in, so seeing it in person gives you the most accurate number.
Free on-site estimates for homeowners across Naples & Southwest Florida. Call or text and we'll get you scheduled.
Tell us a little about the job and we'll get right back to you.
Thanks — we'll be in touch shortly to set up your free estimate.